NEURO Hub

Connections

The Hub’s connections include standard 5-pin MIDI IN, MIDI OUT/THRU, a passive TRS expression pedal input, a Hot Hand sensor input, a mini USB port and 5 Multi-Function outputs. Connect the Dual Expression Pedal or the Hot Hand 3 Wireless Effects Controller to the Hub and assign external control to any pedal on your board. Each scene can hold any number of external control configurations, including simultaneous Hot Hand and expression pedal control of multiple parameters on multiple pedals.

The Hub’s connections sit outside the signal chain, so you can place any non-Source Audio pedal anywhere in your chain. (The Hub does not save presets for non-Source Audio pedals.)

Works with

• Up to 5 One Series and Soundblox 2 pedals, connected to the Multi-Function outputs with the Sensor / Daisy Chain Cable (SA160)
• Dual Expression Pedal (SA161), via the expression input
• Hot Hand 3 Wireless Effects Controller (SA115), via the Hot Hand sensor input
• Soundblox 1 and Soundblox Pro, without scene saving
• Neuro on Mac or PC over USB. The Hub does not connect to the Neuro mobile app.

Specifications

• Standard 5-pin MIDI IN and OUT/THRU
• Passive expression pedal input and Hot Hand® sensor input
• Save and recall up to 128 multi-pedal scenes via MIDI Program Change
• Weight: 6 oz.
• Dimensions: 3.8 in. (W) x 2.1 in. (L) x 1.4 in. (H)
• Power: 9 V DC @ 40 mA (up to 80 mA with Hot Hand accessories)
• Power plug: 2.1 mm (inner dia.), 5.5 mm (outer dia.), center negative, barrel positive
• Expression pedal input: stereo 1/4 in. plug, tip hot, 10k–50k Ohm, linear type
• Multi-Function connector: 4-conductor 3.5 mm plug
• Minimum system requirements: Windows 10, macOS 10.10